frameless glass shower door installation The Bronx NY

The frameless shower doors are becoming more popular with every passing day. They are an excellent product that is grabbing a well-deserved customer’s attention due to some unique qualities. Although the frameless doors are delicate, yet they are easy to install, easy to clean, mold-free, and stylish solutions for any bathroom. The frameless door is an excellent selection if you want to change the ambiance inside. However, you must be careful while choosing the interior because it must be suitable. The installation process is quite simple but in case of difficulties, you can hire someone for frameless glass shower door installation in the Bronx NY. Follow the steps below to install the glass door successfully.

Mark the curb center and set the mounting brackets

The first phase of installing a glass door is the most important from a quality perspective. Because it involves measuring the door area and any mistake will ruin the overall work quality. You can start the work by putting tape on the wall and the on curb to avoid damages. Now use a pencil to draw a wall-to-wall line on the curb. The length of the line must be the same in front and in the back. Before you can install the shower door the bracket must be installed firmly to avoid oscillations. Afterward, you can draw a line on the adjacent wall to install the brackets. Now mark the holes of the bracket and drill the holes. When ready install the bracket with the help of screws.

Install the brackets in the wall and place the fixed panel

install the fixed panel

Measure the height of the fixed panel, and cut it to the length of the U channel. Place the channel against the wall and mark the holes and remove the channel. The shower glass installation company recommends drilling the holes in the wall by using a drill and now remove the tape from the wall and install the U channel. Once you are done, it is time to install the fixed panel. For that install, the shims on the curb provided with the panel and lay a layer of silicone caulk inside the U channel to hold the panel. After that, lift the glass and put it in place. Push the one edge into the U channel and let the second one rest on the shim.

Attach the hinges:

Attach the hinges

This is rather an important phase because hinges control the motion of the door. For that just separate the hinges and fit the provided gaskets on each half of the hinge. Now center the two halves on the door and screw them. Remember to tighten the screws well to prevent unnecessary movements because such movements are dangerous to the glass itself. Doing a test run once the hinges are installed can save you a lot of time.

Hang the door:

When you are about to install the door you must pay attention, because a little mistake can damage the glass door. Usually, the frameless glass door is a bit shorter for the installation of a sweep at the bottom. Put two wooden shims on the curb to support the door and use a helper to place the door on it. Now align it with the line you initially marked on the wall. Use a level on the door top to see if it is balanced. Take your time and do it slowly. Finally, mark the holes in the wall and install hinges to fix the door.  

After the installation of the door, it is important that you pay attention to the finishing as well. Look closely and you’d notice a gap between the door and the panel. Don’t worry you can adjust that by simply losing the hinges a bit. Be careful while you do it because overdoing it would worsen the situation. when you feel that the door is in balance, then tighten the screws of the hinge back. Remember if you find dealing with glass doors difficult you can contact an expert for help. They are quite good with the tools and can wrap things up a lot faster than you. 

FAQs

How much does it cost to install a frameless shower door?

frameless shower door installation cost

The installation cost of a frameless shower door greatly depends on the size and style of the door. That’s why most of the time it costs from 500 to 1000$ and even more in complex situations. 

How long does it take to install a shower door?

Dealing with glass requires a great deal of delicacy, it also depends on the size of the door. Still, a professional can wrap things up in a couple of hours. A DIY would consume a lot more than that.

Are frameless shower doors worth it?

The frameless shower door comes with unique benefits. They are not only a stylish selection but can be easily installed as well. Given their surface qualities they worth every bit of your hard-earned money